Heavy Equipment Shipment Guide: How To Tie Equipment To Trailer

As a heavy equipment supplier, the most important part of the job is to safely transport a heavy equipment consignment.

According to the Department of Transportation and FMCSA, load securement is the essential compliance to meet for all heavy equipment suppliers.

Mentioned below is the complete guide to know about different types of equipment tying methods, safe transportation approaches, and tips on conduct effect heavy equipment transportation.

Ties Down Types To Ship Heavy Equipment On Trailers

Drivers have to comply with four tie-downs to ensure the safety of transporting material while abiding by road safety regulations as heavy-duty vehicles.

Mentioned below are the common tie-down types to use; 

1. Ratchet Straps

Ratchet straps are also called lashings. They provide strength, and high durability to hold tight different types, weights, or sizes of heavy equipment of trailers.

As per the equipment specification, you can select a ratchet strap. These straps are used when;

• Placing heavy equipment on a flatbed trailer
• Tying tarps to intact cargo
• Transportation of medium to heavy loads using air, land, or sea
• Secure material on roof racks
• Shipping big boats or cars through trailers

2. Chains

The chains for tying down material or heavy equipment prevent abrasion during shipment. Chain sizes vary from G30 to G120.

Grade number represents the lifting capability with greater grade number strength also increases.

The chains are used; 

• shipping heavy equipment
• Towing material
• Securing equipment to trailer’s bed
• Shipping equipment through different mediums like land, water, or air

How To Use Tie-Down Points Effectively?

Tie-down points are referred to as anchor joints that help secure tie-down types like straps or chains.

To learn the usage of tie-down points, driers can increase the efficacy of material transportation with improved safety.

Following are the types of tie-down points and their uses to transport shipments safely;

Single-Point Tie-Down Anchors

It has D-rings/welds, recessed, and moveable anchors. Aids cargo mounting on the trailer.

Cleats

Helps in tying ropes to secure heavy cargo.

Track System Tie-Down Anchors

It has an E-track to secure equipment through straps. It also helps in hauling different materials.

O-Track Tie-Downs

It has a metal loop for ratchet strap attachment and secure transportation of heavy equipment.

Tips To Find Best Equipment Tie-Down Method For Shipping

Firstly you can always take an expert’s help to find a suitable tie-down method as per your shipping needs and transport material.

But if you want to do it on your own, here are a few tips to find and integrate the best tie-down technique for safe shipping of heavy equipment;

• Note if all the safety parameters, tie-down types, or tools are aligned with state and global regulations
• Selecting according to the weight, size, and shipping equipment type
• Select per the mood of transportation. For example, if it’s shipping by sea the safety gadgets and security attachments must be different in comparison to air transport.
• As per the load securement rule select the size of chains and straps to lift the load of transporting material

Get The Best NOW

Transporting heavy equipment from one location to another location is a serious job that requires expertise and higher safety levels.

As per the above-mentioned equipment tie-down types and tips you can safely ship material or heavy equipment by any mode of transportation.

Nonetheless, MY-Equipment takes care of our clients when they order. We take the responsibility of safely transporting your purchased equipment to your desired location.

You can see our inventory at MY-Equipment, place an order today and all the other stress of equipment shipment to your place safely is then ours!